Bottom View - Eiki EK-400X Owner's Manual

Bottom view

1
I L
TEM ABEL
1.
Tilt adjustor
2.
Ceiling support holes
3.
Height adjustor
4.
Height adjustor button
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 6 mm (0.23 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment (not less than 5.15 kg) over a
period of 60 seconds.
2 3 4
D
ESCRIPTION
Rotate adjuster lever to adjust angle position.
Contact your dealer for information on mounting the projector on a
ceiling
Adjuster drops down when adjuster button is
pushed.
Push to release adjustor.
— 6 —
2
S
EE PAGE
15
15