Advertisement
Available languages
Available languages
The connecting of the high
pressure hose and the
machine
1) Connect the High pressure
hose to the Gun handle.
2) Connect the High pressure
hose to the Water outlet
22
OPERATING INSTRUCTIONS
Silverline Pressure Washers
are fitted with an 'Autostop'
feature which means that the
machine is only activated when
the lance trigger is depressed,
and automatically deactivates
the water flow when the trigger
is released. This saves water
and power, and gives the user
greater control of the product.
In 'Autostop' mode, the water
flow stops, but the pump
continues to run. If you intend
to suspend the water flow for
more than 3 minutes, switch
the pressure washer off.
Prior to each time of use, it is
necessary to 'bleed' the
trapped air within the lance.
It is recommended that
positioning the lance at a 45
angle to the surface to be
cleaned
will
maximum control and the
greatest cleaning efficiency.
When cleaning a vertical
surface using detergent, start
from the bottom and work
your way up, as this will
give
you
Advertisement
