Advertisement
Available languages
Available languages
INSTRUCTION FOR USE
1. Stand the machine up,
placed on a flat ground.
2. Check the water entry filler
to make sure it is free of
blockage.
3. Use detergent to make better
wash.
4. Connect the nozzle onto the
spray lance and the lance onto
the gun handle.
5. Loosen the high pressure
hose to avoid twist.
6. Connect the gun with the
high pressure hose.
7. Connect the hose onto the
water output exit.
8. Connect the water supply
hose to the water entry of the
machine.
9. Connect another end of the
supply hose to water source.
10. Press the gun trigger and
turn on the water tap to expel
the air inside the machine.
11. Plug in and turn on the
machine.
12. Turn the nozzle until the
water stream is in a shape you
want. See pic 1 and pic 2 for
reference. (if you will use
detergent during cleaning, push
the nozzle in a direction as pic
3 arrow2 shows. While during
normal washing, push the
nozzle as pic 3 arrow 1 shows.)
13. After use, turn off the water
lap, and then the switch, Finally
plug out.
14. If a nozzle becomes
blocked, separate the spray
lance form gun handle and
insert this nozzle cleaning pin
into the orifice to clear the
obstruction.
19
Advertisement
