Advertisement
Available languages
Available languages
of the blade or cutter only.
! Don't leave the tool
running unatended
Always wait until your power
tool has come to complete stop
before leaving it and then
disconnect from power source.
ADDITIONNAL SAFTY
INSTRUCTIONS FOR
PRESSURE WASHERS
! Never direct the water jet at
people or animals, as the water
pressure is very powerful and
can cause serious injury. Avoid
aiming the jet at the pressure
washer body or the power
supply.
! Do not use in an area where
ventilation could be limited and
NEVER cover the unit while it
is in use.
! Always ensure the water
supply es connected and the
flow is continuous into the
washer when being operated.
If the washer is operated when
dry, it could cause irreparable
damage to the machine.
! Please ensure that you engage
the trigger safety catch in the
safe position when spraying
has stopped, even if this is for
a short period of time.
! After use, the machine should
be drained of all water to
reduce the risk of corrosion.
! When not in use, the machine
should be stored in a dry
location that will not fall below
freezing point.
! Do not operate the washer
when it is raining or during a
thunderstorm.
! Always wear safety glasses
or goggles and waterproof
protective clothing when
operating the washer.
use this sequence to prepare
the product for storage:
1. Switch off and disconnect
the mains electrical power to
the machine.
2. Switch off the water supply
to the machine
3. Discharge any remaining
water in the lance by pulling
the lance trigger
4. Disconnect the machine
from te water supply NEVER
turn the water supply off
BEFORE switching off the
pump motor to prevent the
pump running dry, as this will
ALWAYS
17
Advertisement
