Advertisement
Available languages
Available languages
from the power source.
! Accessories
The use of any attachment or
accesory other than those
mentioned in this manual could
result in damage or injury. The
use of improper accessories
could be dangerous.
! Never stand on your power
tool
Standing on your power tool
or its stand could cause serious
injury if the tool is tipped or if
the cutting tool is accidentally
contacted. Do not store
materials above or near the tool
so that it is necessary to stand
on the tool or its stand to reach
them.
!
Switch
connecting.
Ensure the power tool is
switched
connecting to the power
source. If the power tool stops
unexpectedly turn the power
switch to off.
! Do not abuse the power cord
Be sure your cable/extension
cable is properly wired and in
good condition. Always
replace a damaged cable/
16
off
before
off
before
extension cable or have it
repaired by aqualified person
before using it. Never yank or
pull the cable to disconnect it
from the power socket. Never
carry your power tool by it's
cable. Keep the cable away
from damp, heat, oil , solvents,
and sharp edges.
! Check for damaged or
missing parts.
Before each use check if any
part of the power tool is
damaged or missing, check
carefully that it will operate
properly and perform its
intended fumction. Chedk
alignment of moving parts for
binding. Any guard or other
part that is damaged should be
correctly repaired or replaced.
Do not use if the powe switch
does not turn the power on and
off. Check any other condition
that may affect the safety of the
power tool.
DO NOT USE IF DEFECTIVE
! Direction of feed
Feed work into a blade or
cutter against the direction of
rotation
Advertisement
