Error Messages - Dirna bycool Dinamic 1.1 User Handbook Manual

DINAMIC 1.1
EN
Compressor and electro are automatically connected and disconnected when reaching
chosen temperature. (Ex. chosen temperature 23º, compressor and electro are disconnected
at 21º and are reconnected at 24º).
It indicates temperature inside vehicle. In this functioning mode, equipment is switched off.
Hours de functioning and switching off from 0 to 9 hours. On 0 hour, it does not temporise, it
is in manual functioning F0.
To select hours, user will employ
Choose hour which appears on display, 1H (one hour), 2H (two hours)....9H (nine hours),
and push ON/OFF
and will stop when this time period is over.
F3 Low consumption module (Stand-by)
If equipment does not work for 6 to 8 days, it will also go into Stand-by . For equipment to
start again, push manually ON/OFF
!
If when equipment is switched on, it makes continuous noises, it means that
keyboard is badly connected or not connected.
E0 - Recirculation probe failure.
E1 - Low battery, less than 22.8V.
E2 - Electric fan failure or blower
failure.
E3 - Compressor failure
(Causes:
F1 Digital thermometer module
F2 Time programming
select F4 ó F0 , equipment will be working during selected time
engine, wiring,
keys.
key.

Error messages

connector,
lack or excess of charge)
E5 - Failure due to overheating of
control module.
E6 - Anti-ice probe failure.
8
Air conditioning for vehicles