Table of Contents
Advertisement
Any of the following conditions may occur, but do not
indicate the malfunction:
D The light may stay on for about 60 seconds after the ignition
key is turned to the "ON" position. It is normal if it turns off
after a while.
D Depressing the brake pedal repeatedly may turn on the
warning light and buzzer. It is normal if the light turns off and
the buzzer stops sounding after a few seconds.
D You may hear a small sound in the engine compartment
after the engine is started or the brake pedal is depressed
repeatedly. This is a pump pulsating sound of the brake
system, and it is not a malfunction.
(b) Driver's Seat Belt Reminder Light and
Buzzer
The light and buzzer act as a reminder to buckle up the driver's
seat belt.
Once the ignition key is turned to "ON" or "START", the
reminder light flashes and buzzer sounds if the driver's seat
belt is not fastened. Unless the driver fastens the belt, the light
continues flashing and the buzzer stops after about 4 to 8
seconds.
GAUGES, METERS AND SERVICE REMINDER INDICATORS
(c) Front Passenger's Seat Belt Reminder
Light
The light acts as a reminder to have the front passenger buckle
up the seat belt.
Once the ignition key is turned to "ON" or "START", the
reminder light flashes if a passenger sits in the front passenger
seat and does not fasten the seat belt. Unless the front
passenger fastens the belt, the light continues flashing.
If luggage or other load is placed on the front passenger seat,
depending on its weight and how it is placed on the seat,
built in sensors in the seat cushion may detect the pressure,
causing the reminder light to flash.
55
Advertisement
Table of Contents
