Programming Other Devices; Reprogramming A Button; Operating The Homelink - Lexus 2006 lx 470 Manual

Programming an entrance gate /
Programming all devices in the Canadian
market
1. Decide which of the 3 HomeLink
program.
2. Place your hand held gate/device transmitter 25 to 75 mm
(1 to 3 in.) away from the surface of the HomeLink
Keep the indicator light on the HomeLink
programming.
3. Press and hold the selected HomeLink
4. Continuously press and release (cycle) the hand held
gate/device transmitter button every two seconds until step 5
is complete.
5. When the indicator light on the HomeLink
slow to a rapid flash after 20 seconds, you can release both
buttons.
6. Test the operation of the HomeLink
programmed button. Check to see if the gate/device operates
correctly.
7. Repeat steps 1 through 6 for each remaining HomeLink
button to program another device.

Programming other devices

To program other devices such as home security systems,
home door locks or lighting, contact your authorized Lexus
dealer for assistance.
R
buttons you want to

Reprogramming a button

Individual HomeLink
R
.
reprogram a single button, follow the procedure "Programming
R
in view while
the HomeLink
(b) Operating the HomeLink
R
button.
To operate the HomeLink
button to activate the programmed device. The HomeLink
indicator light should come on. The HomeLink
send the signal for up to 20 seconds as long as the button is
R
changes from a
pressed.
R
by pressing the newly
R
INTERIOR EQUIPMENT
R
buttons cannot be erased, however, to
R
".
R
R
, press the appropriate HomeLink
R
R
R
continues to
79