Table of Contents
Advertisement
Understanding Tours
Creating a Preset Tour
Viewing the Preset Tour
________________________________________________________________________________________________________
Document 900.0803 Rev 7
02/29
The following section explains PTZ Tour options. Not every Tour method will be
available for each PTZ camera.
Preset Tour
Cycles through the selected
Recorded Presets.
Preset Tour 2
Cycles through the selected
Recorded Presets with the addition of
a definable Travel Speed and Dwell
Time.
Mimic Tour
'Mimics' a user-defined motion path,
copying everything the user does
(including speed).
Privacy Zone
A user-defined masked out area so it
cannot be viewed.
Sequence
Displays a list of preset sequences. This list is only displayed on supported protocols.
Travel Speed
Sets the speed at which a PTZ moves from one Preset position to the next (when using
Preset Tour 1).
Dwell Time
Defines the length of time (in seconds) that a PTZ Tour stays on a Preset Position
(when using Preset Tour 1).
The Honeywell VCL Tour has been updated. Preset 1 now obeys configured speed
and dwell times and Preset 2 uses PTZ dome defaults.
Select two or more Preset Positions. See Creating a Preset above.
1.
2.
Select the Preset Tour method.
3.
Click the Apply button.
1.
On the Main Display Screen click the PTZ button to open the graphical controller.
2.
Click the video display of the desired PTZ camera.
3.
Click the Tour button. The Preset Tour will activate.
Fusion III DVR User Guide
93
Advertisement
Table of Contents
