Engine Mount; Fuel Tank - Wings Maker Extra 300 - 30 Instruction Manual

10
Rudder
PM2x12mm Screw
3
PA3x12mm Screw
2
3mm Set Screw
1
2.1mm Wheel Collar
1
M2 NUT
1
PM2x12mm
11

Engine Mount

PM3x32mm Screw
4
d2xD4mm Washer
4
With 4-cycle engines, determine
the position of the engine mounts
ensuring the muffler does not
contact the plastic cover.
12

Fuel Tank

Install Basla 5x12x113mm
(For fixing fuel tank)
Fuel Tank 200cc
Ø1mm pilot holes for The Wings Maker tri-horn are pre-drilled.
Please look for pin-hole marks at side of control surfaces.
2mm
3mm Set Screw
2.1mm Collar
PM2x12mm
Engine Mount
PL5111030
P.6
2mm
PA3x12mm
Align the center of the engine
with the center of both marks.
Find the holes for mounting the engine. At the
same time determine also the position of the
engine mounts on the fuselage, with the
engine temporarily mounted.
3.3mm
d2xD4mm Washer
PM3x32mm