Table of Contents
Advertisement
1
Main Wing
2
Main Wing
Cut out to fit in the
aileron servo.
!
Apply glue to both sides of all
surfaces in contact. Use a stick
to apply glue to inner side of wing
joiner sleeve, and apply glue to wing
joiner before putting them together.
Wing joiner not glued properly will
lead to wing failure and plane crash.
3
Main Wing
Wing Tube
Ø9.5x184mm
Peel off shaded portion
covering film.
Plywood
3x30x94mm
P.3
Securely glue together. If coming
off during flights, you lose control
of your airplane which leads to
accidents!
Cut out to fit in the
aileron servo.
Advertisement
Table of Contents
