Extra 300 - 30 INDEX BEFORE YOU BEGIN PARTS LIST ASSEMBLY P.3-P.10 SAFETY PRECAUTIONS P.10 BEFORE YOU BEGIN Read through the manual before you begin, so you will have an overall idea of what to do. Check all parts. If you find any defective or missing parts contact your local dealer. Please DRY FIT and check for defects for all parts that will require CA or Epoxy for final assembly.
Page 3
Parts List 1. MAIN WING -- 1 pair 14. COWLING -- 1 set TRANSPARENT DUMMY COWLING -- 1 pc. 2. RING Ø2.3mm -- 2 pcs SCREW PWA2.6x12mm -- 4 pcs WING TUBE Ø9.5x184mm -- 1 pc. SILICON GROMMET d1.5xD6.5mm -- 4 pcs SPINNER Ø52mm -- 1 set 3.
Page 4
Main Wing Securely glue together. If coming Main Wing off during flights, you lose control of your airplane which leads to accidents! Cut out to fit in the aileron servo. Wing Tube Ø9.5x184mm Cut out to fit in the aileron servo. Apply glue to both sides of all surfaces in contact.
(Main Wing) Elevator PM2x12mm Screw Ø1mm pilot holes for The Wings Maker tri-horn are pre-drilled. Please look for pin-hole marks at under side of control surfaces. PM2x12mm Securely glue together.
Ø1mm pilot holes for The Wings Maker tri-horn are pre-drilled. Rudder Please look for pin-hole marks at side of control surfaces. PM2x12mm Screw PA3x12mm Screw 3mm Set Screw 2.1mm Wheel Collar M2 NUT PM2x12mm 3mm Set Screw PA3x12mm 2.1mm Collar...
Page 8
Engine Lead the 1.2mm throttle rod through the plastic tube and PM3x25mm Screw attach the throttle rod to the throttle lever on the engine. 3mm Washer 3mm NUT 3mm Nut 3.5mm PM3x25mm Fire Wall 3mm Washer 115mm 4.53 in Cowling PWA2.6x12mm Screw d1.5xD6.5mm d1.5xD6.5mm Silicon Grommet...
# First time flyer should never fly by himself / herself. Assistance from experienced flyer is absolutely necessary. # Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly pre-adjusted aircraft. EXTRA 300 - 30 4C 0.48-0.52 is specially designed to be powered by engine (Glow), using a more powerful engine does not mean better performance.