Information; Factory Reset - Roberts STREAM 107 User Manual

Information

Factory reset

If you wish to completely reset your radio to its initial state this may be
performed by following this procedure. By performing a factory reset, all
user entered settings will be erased.
1. Access the menu for the current mode by pressing the Menu button.
Rotate the Tuning/Select control to highlight the 'Main menu' option,
then press the control to select.
2. Rotate the Tuning/Select control until 'System settings' is highlighted
and then press the control to select.
3. Rotate the Tuning/Select control until 'Factory Reset' is highlighted
and then press the control. Rotate the Tuning/Select control and
highlight 'YES' to proceed.
If you do not wish to carry out a system reset, highlight 'NO' and then
press the control. The display will revert to the previous menu.
4. With 'YES' highlighted, press the Tuning/Select control. A full reset
will be performed and the radio will restart as if fi rst plugged in. The
DAB stations list together with any preset stations will be erased and
your wireless network connection details will be lost. All confi guration
settings will be restored to their defaults, the clock and alarms will be
reset.
In case of malfunction for any reason, reset the product as described
above to resume normal operation. It may be necessary in some cases
to disconnect the mains power and batteries, then reconnect power after
10 seconds.
In case of malfunction due to electrical fast transient (burst), reset the
product as above (reconnection of the power source may be required) to
resume normal operation.
Main menu
Music player
DAB
FM
Sleep
Alarms
System settings
1
System settings
Network
Time/Date
Backlight
Inactive Standby
Language
Factory Reset
1-4
Factory reset
Information
Proceed?
86