Operation Without The Remote Control - Metz 42TM92 Operating Instructions Manual

68

4. Operation without the remote control

This operating mode is provided only for situa-
tions where, for example, the batteries in your
remote control are flat or you cannot find the
remote control.
The local controls are located on the front of
the tuner box.
Switching on
Press the power switch
switch to standby mode. Switch on the plasma
monitor with the power switch. The LEDs on both
units light red. The press the "P+" or "P –" key
to switch the TV set on. Both LEDs change to
green.
Adjusting the volume:
z +" or „z
Press key , „z
Selecting stations:
Press key , "P+" or "P–".
Opening the menu:
Press key "M". Then use the keys "P+" , "P –" ,
z +" and "Volume –" to navigate in the menu.
„z
TV/AV:
The key "AV" is used to switch between TV
mode and AV mode.
on the tuner box to
z –".