Metz 42TM92 Operating Instructions Manual page 67

K e y
On On / Standby
0...9 Numeric keys: title selection
Cursor up/down
Cursor left/right
O K OK / Enter
TV volume +/-
Vol.+/–
Mute
Menu
P-
Text
Info
P+
red STOP/Search
green
white
yellow
blue
I-II
TV
21
AV
22
Select
23 Select operating level
Search:
Proceed as described above for entering the codes for VCR, DVD, CD, tuner, tape as far as the step
where the code number is entered. Then enter "001" for the search function. The LED blinks 2x to
acknowledge the input. Then press and hold the search key (which depends on the operating level;
see the table) until the device stops or switches off (a STOP or OFF command is automatically trans-
mitted every 1.5 seconds).
Then release the search key and press the Select key to save the code which was found.
Reset:
Proceed as described above for entering the codes for VCR, DVD, CD, tuner, tape as far as the step
where the code number is entered. Then enter "000" for the reset function. The LED blinks 2x to
acknowledge the input. All codes are now reset to the factory default settings.
The reset is executed for all operating levels, regardless of the level from which it is initiated.
3. The remote control
D V D
C D ( I-II )
ON: Display time/track
ON&AV, ON:On/Standby
Return
Angle
Num.keys: title select. Num.keys: progr.select.
AMP volume +/-
TV mute
MENU
Title
Display
Pause
STOP/OPEN-CLOSE/Search Num.key
PLAY
EJECT
Skip +
Skip –
Audio
Subtitle
Repeat
Select operating level
T U N E R (
ON:Radio-text on/off
ON&AV, ON: On/Standby
I-II & ON: CD
Title +/– Programme +/–
Frequency +/–
AMP volume +/-
Pause
PLAY
& ON: Tuner
& ON: Tape input & ON: Tape input
AUX input AUX input
Select operating level
H i F i
)
T A P E (
I-II & ON: CD
AMP volume +/-
=Search Search
& ON: Tuner
AUX input
Select operating level
)
67