Audio Settings - Pioneer MVH-X380BT Owner's Manual

Menu Item
S.RTRV
USB iPod
[1] (effective for low
compression rates),
[2] (effective for high
compression rates),
[OFF]
AUDIO BOOK
iPod
[FASTER], [NORMAL],
[SLOWER]
BOOKMARK
NEW STATION
[FROM TRACK], [FROM
ARTIST]
PAUSE
PLAY
STOP

AUDIO settings

Menu Item
FADER*1
16
En
Description
Enhance compressed audio and restore
rich sound. (Not available when USB is
selected as a source and the MIXTRAX
function is set to on.)
Change the playback speed. (Not available
when [CTRL iPod] is selected in the control
mode.)
Store the track information currently being
played in your Pandora account.
Create a new station based on the track or
artist currently being played.
Pause or resume playback.
Start playback.
Stop playback.
Description
Adjust the front and rear speaker balance.
Menu Item
BALANCE
EQ SETTING
[SUPER BASS], [POWERFUL],
[NATURAL], [VOCAL],
[CUSTOM1], [CUSTOM2],
[FLAT]
Select an equalizer band and
level for further customizing.
Equalizer band: [80HZ],
[250HZ], [800HZ], [2.5KHZ],
[8KHZ]
Equalizer level: [+6] to [–6]
LOUDNESS
[OFF], [LOW], [MID], [HI]
SUB.W*2
[NOR], [REV], [OFF]
SUB.W CTRL*2*3
Cut-off frequency: [50HZ],
[63HZ], [80HZ], [100HZ],
[125HZ], [160HZ], [200HZ]
Output level: [–24] to [+6]
Slope level: [–12], [–24]
BASS BOOST
[0] to [+6]
HPF SETTING
Cut-off frequency: [OFF],
[50HZ], [63HZ], [80HZ],
[100HZ], [125HZ], [160HZ],
[200HZ]
Slope level: [–12], [–24]
Description
Adjust the left and right speaker balance.
Select or customize the equalizer curve.
[CUSTOM1] can be set separately for each
source. However, each of the below
combinations are set to the same setting
automatically.
• USB, iPod, PANDORA (iPhone), ANDROID,
and APP (iPhone)
• BT AUDIO, PANDORA (Android),
ANDROID, and APP (Android)
[CUSTOM2] is a shared setting used for all
sources.
Compensate for clear sound at low volume.
Select the subwoofer phase.
Only frequencies lower than those in the
selected range are output from the
subwoofer.
Select the bass boost level.
Only frequencies higher than the high-pass
filter (HPF) cutoff are output from the
speakers.