Boot Setup Utility - EMAC PCA-6782 User Manual

! IRQ
– IRQ[3,4,5,7,9,10,11,14,15]:
Available: Specified IRQ is available to be used by PCI/PnP devices.
Reserved: Specified IRQ is reserved for use by Legacy ISA devices.
DMA Channel [0,1,3,5,6,7]:
– Available: Specified DMA is available to be used by PCI/PnP devices.
Reserved: Specified DMA is reserved for use by legacy ISA devices.
Reserved Memory Size: Size of memory block to reserve for legacy ISA
devices.
3.7

Boot Setup Utility

The following options are available:
! Quick Boot
Allows the BIOS to skip certain tests while booting. This will decrease the time
needed to boot the system.
Quiet Boot
!
If this option is set to Disabled, the BIOS displays normal POST messages. If
Enabled, an OEM Logo is shown instead of POST messages.
! AddOn ROM Display Mode
This is for choosing display mode of option ROM information under DOS envi-
ronment during booting up process. Available options include Force BIOS,
Keep Current.
! Bootup Num-Lock
Select the Power-on state for Numlock.
! PS/2 Mouse Support
Enable or disable PS/2 interface mouse support. Available options include
Auto, Enable, Disable.
Wait For 'F1' If Error
!
Wait for the F1 key to be pressed if an error occurs.
PCA-6782 User Manual
Figure 3.12 Boot Settings Configuration
38