Super I/O Configuration - EMAC PCA-6782 User Manual

3.3.3

Super I/O Configuration

OnBoard Floppy Controller
!
Enable or disable the floppy function.
! Floppy A
Select the type of floppy drive connected to the system. We suggest you dis-
able the floppy if installing Windows Vista without a floppy drive.
! Floppy B
Select the type of floppy drive connected to the system.
! Floppy Mode Select
For user to set floppy mode, this must match specification of the floppy drive
connected to CPU card, available options are 360 KB 5 1/4", 1.2 MB 5 1/4", 720
KB 3 1/2", 1.44 MB 3 1/2", 2.88 MB 3 1/2".
! Serial Port1 Address
This option configures serial port 1 base addresses.
! Serial Port2 Address
This option configures serial port 2 base addresses. The following options are
also available:
– Serial port2 Mode
This option configures serial port 2 mode. Available options include Normal,
IrDA, ASK IR.
! Parallel Port Address
This configures parallel port base addresses. The following options are also
available:
– Parallel Port Mode
This option configures Parallel Port mode. Available options include Normal,
Bi-directional, ECP, EPP, ECP & EPP.
– Parallel Port IRQ
This option configures s Parallel Port base IRQ.
Figure 3.6 Super I/O Configuration
33 PCA-6782 User Manual