Table of Contents
Advertisement
2.18
ATX Feature connector(ATXF1)
ATXF1
The PCA-6782 can support an advanced soft power switch function. When using an
ATX power supply, please follow the instructions below to enable ATX functions.
1.
Find ATX feature cable (1700002343).
2.
Connect the 3-pin plug of the cable to ATXF1 (ATX feature connector). And con-
nect another plug to backplane HCN1 connector.
3.
Connect the power on/off button cable of the chassis to JPF1's pins 9 and 10.
Default value is set ATXF1 to short pin1-2 to support AT power.
Important: Make sure that the ATX power supply can take at least a 10mA load on
the 5 V standby lead (5 VSB). If not, you may have difficulty powering on your sys-
tem.
23
PCA-6782 User Manual
Advertisement
Table of Contents
