Receiving Data; Mobile Network Settings - SoftBank 402HW User Manual

･ After operating other device to receive data, data is sent.
･ After data is sent,

Receiving Data

®
Enable Bluetooth on tablet and pair with other device beforehand.
1
Send data from other device
･
appears in Notification Bar, and screen indicating a file was forwarded appears.
2
Accept
･ Data is received.
･ After data is received,

Mobile Network Settings

Set network, carrier, etc. Settable items are the following.
Item
Data service
Data roaming
Network Mode
Network switch
reminder
Enable always-on
mobile data
Access Point
Names
Network operators
1
In Home Screen, Settings → Mobile networks
･ Mobile network settings open.
2
Set each item
･ Settings are made.
appears in Notification Bar.
appears in Notification Bar.
Set whether to enable data transmission via mobile networks.
Set whether to enable data transmission during roaming.
Set type of networks to connect to.
Set whether to switch to a mobile network if Wi-Fi is
disconnected.
Set whether to always enable data access via mobile
networks.
Add, edit, and delete access points.
Also, switch access points.
Tablet is set by default to connect to an appropriate carrier
(network); use to manually connect to a carrier.
81
Description