12
Tablet Settings
Wi-Fi Settings
Select from detected Wi-Fi networks.
1
In Home Screen, Settings →
・ Wi-Fi is enabled.
・ Tap
to disable Wi-Fi (
2
Wi-Fi
・ Wi-Fi settings appear.
3
Tap access point → Enter password → Connect
・ Tablet is connected.
・ Password (indicated by WEP, WPA, KEY, etc.) may be found on a label on your
Wi-Fi router. For details, contact the vendor of the router. For public wireless LAN
services, inquire about the password with your ISP.
・ Omit password entry for unprotected access points.
Note
If both a Wi-Fi network and a mobile network are available, tablet connects to the Wi-Fi
network first. If Wi-Fi becomes disconnected, tablet connects to the mobile network.
To connect to a Wi-Fi network that uses a hidden SSID,
required network information (SSID etc.) to connect.
Using WPS (push-button) to Connect
In Wi-Fi settings,
→ OK
Using WPS (WPS PIN) to Connect
In Wi-Fi settings,
access point
Connecting to Wi-Fi Direct-Capable Device to Transfer Data
In Wi-Fi settings, Wi-Fi direct → Tap device → Permit connection on other
device
).
→ WPS Push Button → Press push-button on access point
→ Input WPS PIN → Enter WPS PIN shown on tablet in
78
for Wi-Fi (
)
→ Add network → Enter