Internet Connectivity; Connecting To A Wi-Fi Network; Connecting To A Wi-Fi Network (Wps) - SoftBank 402HW User Manual

3

Internet Connectivity

Connecting to a Wi-Fi Network

Select from detected Wi-Fi networks.
1
In Home Screen, Settings →
･ Wi-Fi is enabled.
･ Tap
to disable Wi-Fi (
2
Wi-Fi
･ Wi-Fi settings appear.
3
Tap access point → Enter password → Connect
･ Tablet is connected.
･ Password (indicated by WEP, WPA, KEY, etc.) may be found on a label on your
Wi-Fi router. For details, contact the vendor of the router. For public wireless LAN
services, inquire about the password with your ISP.
･ Omit password entry for unprotected access points.
Note
 To connect to a Wi-Fi network that uses a hidden SSID,
required network information (SSID etc.) to connect.
 Enabling Wi-Fi increases power consumption. To save battery power, disable Wi-Fi
when not in use.

Connecting to a Wi-Fi Network (WPS)

If your wireless router supports WPS (Wi-Fi Protected Setup), use WPS to quickly
connect to a Wi-Fi network.
1
In Home Screen, Settings →
･ Wi-Fi is enabled.
･ Tap
to disable Wi-Fi (
2
Wi-Fi
･ Wi-Fi settings appear.
for Wi-Fi (
).
for Wi-Fi (
).
22
)
→ Add network → Enter
)