Resetting The Lamp Timer - Epson MovieMate 72 User Manual

6. Gently insert the new lamp and tighten its screws.
Caution: Don't touch the glass portion of the lamp with your bare hands; the invisible residue
left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new
lamp assembly.
7. To replace the lamp cover, insert the tabs and then snap the cover into place. (MovieMate
won't work if the lamp cover is loose.)
8. After replacing the lamp, you need to reset the lamp timer, as described in the next
section.

Resetting the Lamp Timer

1. Connect the power cable and press the
2. Press
3. Press
4. Press
5. Select
Yes
The lamp usage timer displays
10 hours.
50
Caring for Your Epson MovieMate
on the remote control. You see the Visual Setup menu.
to highlight , then press
Info
again. You see the following on the screen:
and press to reset the timer.
(zero hours) until you've used the lamp for at least
0 H
button to turn MovieMate on.
to select it.