9.
The RAID drivers are copied to the floppy disk. After creating a RAID
driver disk, eject the floppy disk, then write-protect it to prevent
computer virus infection.
10. Press any key to return to the Makedisk menu.
To create a RAID driver disk in Windows
1.
Place the motherboard support CD in the optical drive.
2.
When the Drivers menu appears, select the RAID driver disk you wish
to create:
•
Click Make ICH7 32 bit RAID Driver Disk to create an
•
Click Make ICH7 64 bit RAID Driver Disk to create an
Or
Browse the contents of the support CD to locate the driver disk utility:
•
ICH7 32-bit RAID Driver Disk
•
ICH7 64-bit RAID Driver Disk
Refer to \Drivers\Chipset\Intel\MSM\Readme.txt
Refer to section "5.2.2 Drivers menu" for details.
3.
Insert a formatted high-density floppy disk to the floppy disk drive.
4.
Follow screen instructions to complete the process.
5.
After creating a RAID driver disk, eject the floppy disk, then
write-protect it to prevent computer virus infection.
To install the RAID driver:
1.
Install an operating system to the selected hard disk drive. During
installation, the computer prompts you to press the F6 key if you are
installing a third-party SCSI or RAID driver.
2.
Press <F6>, then insert the RAID driver disk to the floppy disk drive.
3.
Follow screen instructions to install the RAID drivers.
5-30
Intel
ICH7 RAID driver disk for a 32-bit system.
®
Intel
ICH7 RAID driver disk for a 64-bit system.
®
environment:
®
Chapter 5: Software support