Asus Motherboard P5LD2 Manual page 128

Creating a RAID 1 set (mirrored)
To create a RAID 1 set:
1. From the utility main menu, select 1. Create RAID Volume, then press
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
[↑↓]-Change
2. Enter a name for the RAID 1 set, then press <Enter>.
3. When the RAID Level item is highlighted, press the up/down arrow key
to select RAID 1(Mirror), then press <Enter>.
4. When the Capacity item is highlighted, key in the RAID volume
capacity that you want, then press <Enter>. The default value
indicates the maximum allowed capacity.
5. Press <Enter> when the Create Volume item is highlighted. This
warning message appears.
6. Press <Y> to create the RAID volume and return to main menu or <N>
to go back to Create Volume menu.
5-22
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[ DISK/VOLUME INFORMATION
cannot contain special characters.
[TAB]-Next
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
CREATE ARRAY MENU ]
Volume1
RAID1(Mirror)
Select Disks
N/A
XX.X GB
Create Volume
[ESC]-Previous Menu
]
[Enter]-Select
Chapter 5: Software support