Carrier 40MB*F Owner's Manual page 9

G
©
®
f "x
EoFoL,owo0
-@
-@
O
@
O
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset
temperature at cooling or heating operation in
the shortest time(if the indoor unit does not
support this function, there is no corresponding
operation happened when pressing this button.)
SELF CLEAN Button
Active/Disable Self Clean function. For details,
please see "Special functions" in "USER'S
MANUALZ'.
O LED Button
Disable/Active indoor screen Display. When
pushing the button, the indoor screen display
is cleared, press it again to light the display.
O
O
UP Button( _ )
Push this button to increase the indoor
temperature setting in I°F increments to 86°R
DOWN Button( _ )
Push this button to decrease the indoor
temperature setting in I°F increments to 62°F.
NOTE: Press and hold "_" and "_"
buttons together for 3 seconds will alternate
the temperature display between the °C & °F
scale.
FP/EYE Button
Active/Disable freeze protection function. If
pushing more than 2 seconds, the Intelligent
eye function will be activated, pushing more
than 2 seconds again to disable.
During the heating operation(only when the
setting mode is HEAT),If pushing this button
more than 2 seconds, the freeze protection
function is activated. The unit will operate at
high fan speed with the temperature automa-
tically set to 8°C.The display window of indoor
unit will display 'FP'. For the unit without
display area, the Defrost indicator light will be
9