Unitron Quantum Pro ITE User Manual page 10

wheel slowly downward towards the floor. Each
step will change the hearing aid performance.
Sometimes multiple steps are required to
achieve the desired listening results. After each
step wait for about 4-5 seconds to allow the
hearing aid to adjust to the new setting.
As you change the comfort-clarity control level,
your hearing aids will beep.
Comfort-clarity control setting
Ideal comfort and clarity level
Increase sound clarity level
Increase listening comfort
Maximum sound clarity level
Maximum listening comfort level
14
Beeps
1 beep
short beep
short beep
2 beeps
2 beeps
Push button
Your hearing aids may be equipped
with a push button which can be set for
switching between programs, to adjust
your volume, or to adjust comfort-clarity.
Program control
If the push button has been configured as a
program control, each time you push the button,
you will move to a new hearing aid program.
Your hearing aids beep to indicate which
program you are in.
Program 1
(e.g. automatic program)
Program 2 (e.g. speech in noise)
Program 3 (e.g. easy-t/telephone)
Program 4 (e.g. music)
Easy-t/telephone (see pg 20)
DuoLink (if enabled)
(see pg 18)
1 beep
2 beeps
3 beeps
4 beeps
short melody
Opposite ear beeps
the same as side
being adjusted
15