Default Settings - Metrologic MS6520 Cubit Installation And User Manual

A B
PPENDIX

Default Settings

Many functions of the scanner can be "programmed" - that is, enabled or
disabled. The scanner is shipped from the factory programmed to a set of
default conditions. The default parameter of the scanner has an asterisk (*) in
the charts on the following pages. If an asterisk is not in the default column
then the default setting is Off or Disabled. Every communication does not
support every parameter. If the communication supports a parameter listed in
the charts on the following pages, a check mark will appear.
Parameter
UPC/EAN
Code 128
Code 93
Codabar
Interleaved 2 of 5 (ITF)
MOD 10 Check on ITF
Code 11
Code 39
Full ASCII Code 39
MOD 43 Check on Code 39
MSI-Plessey
MSI-Plessey, 10/10 Check Digit
MSI-Plessey, MOD 10 Check Digit
Paraf Support
ITF Symbol Lengths
Minimum Symbol Length
Symbol Length Lock
Bars High as Code 39
Spaces High as Code 39
Bars High as Scanned
Spaces High as Scanned
DTS/SIEMENS
27
Default RS-232* Light Pen
a a
*
a a
*
a a
*
a a
a a
*
a a
a a
a a
*
a a
a a
a a
a a
a a
*
a a
a a
Variable
a a
4
a a
None
a
*
a
a
a