Stereo And Bilingual Transmissions (For Dtv Programmes); Stereo And Bilingual Transmissions (For Atv Programmes) - Toshiba 50L9450 Series Owner's Manual

6
Press  or  to adjust the settings as required.
Hue
Red 0
NOTE:
If you select 3D Colour Management Off mode, this
mode is not available.
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu, press
 or  to select Reset.
2
Press OK.
3
A confi rmation message will appear. Press  or
 to select Yes, and then press OK.
Using the Picture Analyser
Displays the picture histogram.
1
From the PICTURE menu, press  or  to
select Picture Analyser.
Histogram: Shows the bright and dark areas of
the displayed picture, and the distribution of
colours in a graph.
Contrast Curve: Shows the correction curve,
which improves the expressive feel of the
displayed picture, in a graph.
To close the Picture Analyser screen, press
EXIT.
Stereo and Bilingual transmissions
(for DTV programmes)
For stereo or dual mono broadcasts, press s and
use  or  to select settings.
Mode Display
d Stereo
j Dual mono
e Mono
Surround
For multi-audio track broadcasts, press s
repeatedly to change the audio language (- page
37).
28
506584L9450Series_En.indd 28 506584L9450Series_En.indd 28
Using the TV's features
Saturation Brightness
0 0
Pressing 
Stereo S Left S Right
Dual 1 S Dual 2 S Dual
–
–
Stereo and Bilingual transmissions
(for ATV programmes)
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/
bilingual programmes depending on the broadcast
signal.
1
Press MENU, and then press  or  to display
the SOUND menu.
SOUND
MTS
Dual
Balance 0
Sound Mode
Advanced Sound Settings
Audio Distortion Control
TV Mounting
Dynamic Range Control
2
Press  or  to select MTS, and then press 
or  to select Auto or Mono.
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the MTS mode to
Mono.
Noise will be reduced and reception may improve.
NOTE:
If you experience noise with a particular programme
on whose channel reception is usually good, try setting
MTS mode to Auto, then press s to switch to e
Mono (monaural).
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programmes are received.
1
From the SOUND menu, press  or  to select
Dual.
2
Press  or  to select Dual 1 or Dual 2.
NOTE:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status remains even if the TV
is turned off .
Auto
Dual 1
Auto
On
Stand
Off
2014/08/21 14:23:46 2014/08/21 14:23:46