Toshiba 50L9450 Series Owner's Manual page 20

C. Colour System ( - page 70)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal,
the automatic colour system selection (A)
may have malfunctioned, or sound system
selection is wrong. In such a case, select
another colour and/or sound system ( -
page 70).
D. Position skip selection
Press  or  to turn the position skip option
on " 8 " or off " ( ". The position will then be
skipped when you select channels with P U
or P u . The " 8 " mark will appear beside a
position number when you use the Number
button on the remote control.
E. Signal Class
The channel classifi cation.
F. Channel
The channel number on which a station is
being broadcast.
G. Channel search operation
Press  to search up the band or  to search
down the band.
Press  or  repeatedly until your desired
channel is displayed.
When a station is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE
THE SET IS TUNING.
H. Manual Fine Tuning
Press  or  until better picture and sound
are obtained.
I. Signal Booster
If the receiving signal is weak/strong and the
picture is noisy, the picture may be improved
when using this function.
Press the  or  to turn the Signal Booster
On or Off .
J. Label
Station labels appear under the programme
position display each time you turn on the TV,
select a channel, or press
To change or create station labels:
1) Press  or  repeatedly to select a
character for the fi rst space, then press 
or .
20
506584L9450Series_En.indd 20 506584L9450Series_En.indd 20
Using the TV's features
Press OK to store your settings.
Sorting positions
TV channels may be moved and stored to the
position of your choice.
1
From the SETUP menu, press  or  to select
ATV Manual Tuning.
2
With the list of channels now showing, press 
or  to select the channel you want to move
and press .
3
Use  or  to move through the list to your
preferred position. As you do so, the other
channels will move to make room.
4
Press  to store your move.
• Repeat as necessary, and then press EXIT.
.
(blank space)
2) Repeat step 1) to enter the rest of the
characters. If you would like a blank space
in the label name, you must choose a blank
space from the list of characters.
ATV Manual Tuning
Pos. Label
0
1 ABCD
2 EFGH
3 IJKL
4 MNOP
5
6
7
2014/08/21 14:23:45 2014/08/21 14:23:45