Kenwood TK-782 Service Manual page 69

TK-782
Item Condition
3) "nH LRSI"
SSG freq' : 234.950MHz
4) "wL LRSI", "wC LRSI", "wH LRSI" meter
SSG freq' : Same as
narrow adjustment.
SSG output : Sensitivity
value of 12dB SINAD.
SSG MOD : 3.0kHz (Wide)
5. RSSI (High) 1) Set test mode
Select "nL HRSI" in tuning mode.
SSG freq' : 217.050MHz
SSG output : –70dBm
SSG MOD : 1.5kHz (Narrow)
2) "nC HRSI"
SSG freq' : 226.050MHz
3) "nH HRSI"
SSG freq' : 234.950MHz
4) "wL HRSI", "wC HRSI", "wH HRSI"
SSG freq' : –70dBm
SSG output : Sensitivity
value of 12dB SINAD.
SSG MOD : 3.0kHz (Wide)
6. Squelch 1) Set test mode
check CH : CH1 - Sig1
SSG freq' : 226.050MHz
SSG output : 15dB SINAD level
2) SSG output : OFF
7. QT check 1) Set test mode
CH : CH1 - Sig5
SSG freq' : 226.050MHz
SSG MOD
INT : 1kHz
EXT : 151.4Hz
SSG system MOD DEV
: ±3.75kHz (Wide)
: ±1.85kHz (Narrow)
SSG output : 12dB SINAD level
2) CH : CH1 - Sig4
CH1 - Sig6
CH1 - Sig7
68
ADJUSTMENT
Measurement
Test-
Unit Terminal Unit
equipment
SSG ANT
AF VTVM ACC
Distortion (EXT.SP)
Oscilloscope
AG
Adjustment
Parts Method
Writing values only.
Writing values only.
Check Squelch must be opened.
(Wide/Narrow)
Squelch must be closed.
(Wide/Narrow)
Check Squelch must be opened.
(Wide/Narrow)
Squelch must be closed.
Specifications/Remarks