Cooking In Two Stages - Daewoo KOR-612L0S Service Manual

COOKING IN TWO STAGES

For best results, some recipes call for one Power Level for a certain length of time and another power level for a
different length of time.
Your microwave oven can be set to change from one to another.
DO THIS...
5 3 0
1. Touch number pads for the
cooking time you want in the
first stage.
M-HIGH
2. Touch the power level pad for
the power level you want
among
HIGH M-HIGH
and
MED M-LOW
in the second stage.
4 2 0
3. Touch the number pads for the
cooking time you want in the
second stage.
START
4. Touch START pad.
THIS HAPPENS...
LOW
When you touch START pad, both STAGE1 & 2 indicator lights come on,
STAGE1 indicator light starts blinking to show you that the over is cooking
in the first of two cook stages. The oven will cook at the power you select-
ed for stage one. At the end of stage one, the oven will beep and start
stage two, the STAGE1 indicator goes off and the STAGE2 indicator
starts blinking. The display counts down the time remaining in stage two
when stage two ends, you will hear 3 beeps.
11
The STAGE1 indicator lights and
the display will show the numbers
you pressed in the order you
touched.
This example shows 5 minutes 30
seconds at full power.
The STAGE2 indicator lights and
"P-80" is displayed.
The display will show what you
touched.
The display will show the numbers
you pressed in the order you
touched.
This example shows 4 minutes 20
seconds at power level M-High.