Commercial Display Lan Control; Osd Menu Setup For Network Connection; Before Using Web Browser Control; Access From Web Browser - ViewSonic CDP4260-L User Manual

5. Commercial Display LAN
Control
5.1. OSD Menu Setup for Network
Connection
To proceed the network setting, you will have to
enter the OSD menu.
SERIAL CONTROL
1. Select {LAN} as the nectwork control port.
2. Press [MENU] button on this Display's control.
3.
{ADVANCED OPTION} menu.
4. Press [SET] button to enter the submenu.
5.
select the {SERIAL CONTROL} menu, press
[+] or [-] button to select {LAN}.
LAN SETTING
Assign {IP ADDRESS}, {SUBNET MASK}, and
{DEFAULT GATEWAY} for the display.
NOTE: The {LAN SETTING} is available only after
setting the {SERIAL CONTROL} to {LAN}.
1. Press [MENU] button on this Display's control.
2.
SETTING} menu.
3. Press [SET] button to enter the submenu.
the {DHCP CLIENT} menu, press [+] or [-] button
to select {ON}.
Press [MENU] button to return to the previous
menu, or press [MENU] button several times to
exit the OSD menu.
DHCP CLIENT
To obtain an IP address automatically using a
DHCP server, set this to {ON}. If DHCP server is
not used, set this to {OFF}.
IP ADDRESS
Enter an IP address if DHCP server is not used.
SUBNET MASK
Enter a subnet mask if DHCP server is not used.
DEFAULT GATEWAY
Enter a gateway address if DHCP server is not
used.
5.2.

Before Using Web Browser Control

To use the Web browser control, computer setups
are required.
Computer Setup (for Windows operating
system)
Disable proxy server settings
1. Display [Internet Properties] window.
2. Click [Start] ->[Control Panel]->[Network and
Internet Connections]->[Internet Options].
3. Click the [Connections] tab and then [LAN
Settings].
4.
script] and [Use a proxy server for your LAN]
boxes.
5. Click [OK].
5.3.

Access from Web Browser

Access to the TOP screen of the Web browser
control using a Web browser.
1. Start your Web browser.
2. Enter the IP address from the {IP ADDRESS}
set with the {LAN SETTING} of this Display.
3. Enter the {Username} and {Password} when
the Authentication screen is displayed.
Default {Username} and {Password} are as
follows:
{Username}: admin
{Password}: 0000
NOTE: The "Web Browser Control" is currently
supported with Windows IE7, IE8 or IE9.
Picture
Screen
24