Vesa Grid - ViewSonic CDP4260-L User Manual

VESA Grid

1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath
the screen surface so as not to scratch the screen face.
2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc).
3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting
procedures could result in damage to the equipment or injury to the user or installer. Product warranty
does not cover damage caused by improper installation.
4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of
the mounting bracket) and tighten them securely.
1.5.1. VESA Grid
CDP4260-L / CDP4262-L /
CDX4652-L
CDP5560-L / CDP5562-L
Caution:
To prevent the display from falling:
• For wall or ceiling installation, we recommend installing the display with metal brackets which are
commercially available. For detailed installation instructions, refer to the guide received with the
respective bracket.
• To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or
other natural disaster, be sure to consult the bracket manufacturer for installation location.
Enclosure Ventilation Requirements
To allow heat to disperse, leave space between
surrounding objects as shown in the diagram below.
Table
400(H) x 200(V) mm
200(H) x 200(V) mm
400(H) x 400(V) mm
400(H) x 200(V) mm
200(H) x 200(V) mm
Protective Sheet
For Tabletop stand
100 mm
3
100 mm
100 mm
100 mm