Oven Restraint Kit; Chefcomm Pro; Chefcomm Limited; Oven Connect - TurboChef ENCORE Service Manual

4 SPECIFICATIONS ANd INSTAllATION

Oven Restraint kit

Part Number: TC3-0242
WArNING: The oven restraint Kit will
not prevent the oven from falling off a
countertop if the oven is pulled off or
allowed to slide off the edge. Installation
instructions are included with the kit.

ChefComm Pro

Part Number: CoN-7006
ChefComm Pro® lets you easily create menu
settings on a computer and upload them to
an oven via smart card or uSb. For more
information, call TurboChef Customer Support
at 800.90Turbo or +1 214.379.6000.

ChefComm limited

Part Number: CoN-7016
ChefComm Limited
version of ChefComm Pro that helps ensure menu
settings are easy to distribute, while preventing
them from being changed at the store level.

Oven Connect

oven Connect
settings for multiple ovens at once, from one
central location via LAN. oven Connect can also
download oven diagnostics and counters from the
oven to your computer. For more information
on how to network ovens, see page 11. For
information on oven Connect, contact
TurboChef Customer Support at 800.90Turbo
or +1 214.379.6000.
is a "read-and-upload only"
TM
allows you to update menu
TM

voltage Selection

For North America oven models, the oven will
detect 208 or 240 incoming voltage.
If incoming voltage for the store is different than
the factory-preset voltage, the operator will be
required to select either 208 or 240 after pressing
the on/off key to turn on the oven. The correct
voltage will be enlarged on the screen, identifying
which option to select (see below).
SELECT VOLTAGE:
208 VAC
240 VAC
Figure 3: Select voltage

ventilation

The TurboChef Encore
TM
by underwriter's Laboratory® for ventless operation
(uL 710b, KNLZ listing) for all food items except
for foods classified as "fatty raw proteins." Such
foods include bone-in, skin-on chicken, raw ham-
burger meat, raw bacon, raw sausage, steaks, etc. If
cooking these types of foods, consult local HVAC
codes and authorities to ensure compliance with
ventilation requirements.
NoTE: In no event shall the manufacturer assume
any liability for damages or injuries resulting from
installations which are not in compliance with the
instructions and codes previously listed.
oven has been approved