Step 8:
Click on "yes".
Step 9:
Click on "done".
WARNING:
Do not remove compact flash card until formatting has finished. This process can take up
to 2 minutes.
Video Port
The Video port connects the camera to conventional TVs and VCR recorders.
Playback images and movies on your TV or record them on your VCR recorder. The
supplied cable provides a standard RS170 composite video signal output to an RCA
plug. Use the Up/Down switch to sequence through the captured images and movies.
The video port is only active in the setup mode, be sure that the toggle switch is in the
setup position. Images through the video port are viewed in low resolution (320x240).
View full resolution using the computer and TV card readers.
NOTE:
Video port will take about 10 seconds to load images.
Field Viewing
Use a portable, battery operated TV with video input or a VCR camera with video
input to view images and movies at the tree. Simply connect to the camera video port
with the toggle switch in the Setup mode and use the Up/Down switch to sequence
through the captured images and movies.
15
Manual-3-30.indd Sec2:15
Manual-3-30.indd Sec2:15
4/23/07 4:16:41 PM
4/23/07 4:16:41 PM