Camera Settings; Status Menu; Capture Menu; Delete Menu - Recon Outdoors Talon IR User Manual

5

Camera Settings

Status Menu

The status menu is used to examine the battery voltage, temperature and image
count (# images stored on the Compact Flash ™ card).
Press the "MENU" key until the status menu appears on the display. Press the
"SELECT" key to enter the menu. Use the "UP" and "DOWN" keys to increment
through the available status fi elds.
Press the "MENU" key to exit the menu.

Capture Menu

Press the "MENU" key until the capture menu appears on the display. Press the
"SELECT" key to enter the menu. Use the "SELECT" key to manually snap pictures.
The busy LED on the keypad will stay on during capture and during the storage of
the image or movie to the Compact Flash ™ card.
Press the "MENU" key to exit the menu.
WARNING:
Do not insert or remove the compact flash memory card unless the mode switch is in the off
position. Also, do not remove the flash memory card while the keypad "busy" LED is on.

Delete Menu

Press the "MENU" key until the delete menu appears on the display. Press the
"SELECT" key to enter the menu. Use the "UP" and "DOWN" keys to change between
"Yes" and "No". Use the "SELECT" key to start the delete function. The busy LED will
be on during delete.
WARNING:
Do not turn the camera off or remove memory card until the delete function is finished
(this will corrupt the card).

Mode Menu and Flash Card Capacity

Use this menu to choose between picture mode, high-resolution movie mode, and
low-resolution movie mode. Picture mode is the only mode that stores the date/
time/moon phase/temperature/customer name. The movie modes do not have this
capability. High-resolution movies are recorded with 640x480 resolutions at a frame
9
Manual-3-30.indd Sec2:9 Manual-3-30.indd Sec2:9 4/23/07 4:16:39 PM 4/23/07 4:16:39 PM