Operation; To Operate Camera; Photo/Video Viewing And Deleting - Recon Outdoors HS410 User Manual

4. Operation

4.1 To Operate Camera

Move Power Switch to ON. The red indicator light on front of camera will flash 5 times. The camera is now in
Operating Mode, ready to take photos and/or videos.
For Status Screen, move Power Switch to ON; then press "OK" button to display Status Screen. The Status Screen
will show battery charge condition, Pic/Video mode, image size, multi-shot setting, and SD Card status (the amount
used / total capacity). Note: While viewing the Status Screen, after 60 seconds of inactivity the camera will
automatically enter Operating Mode.

4.2 Photo/Video Viewing and Deleting

4.2.1 Viewing
To view photos and videos:
1) Switch ON "Power Switch", Press "OK" once to turn on display, press arrow button "↑" to enter Playback
Mode; press "←" and "→" for selection, "OK" to view photo/video.
2) Press button "↑" again to exit.
3) In Playback Mode, press "Menu" button to delete files, or format SD card (see below); press "Menu" again
to exit.
4.2.2 Deleting
To delete one selected photo/video, in Playback Mode press "Menu" button:
1) Press "OK" to choose, press "↑" and "↓" for selection, "Yes" to confirm, "No" to exit to previous page.
2) Delete All.
4.2.3 Format SD Card
To permanently delete all data from SD card, in Playback Mode press "Menu" button:
1) No
2) Yes: to format SD card via camera.
3) Press "←" and "→" for selection, "Yes" to confirm, "No" to exit to previous page.
- 10 -