Setup Menus; Set Time Menu - Recon Outdoors Talon IR User Manual

4

Setup Menus

Use the "MENU" key to cycle through the available menus. Use the "SELECT" key
to enter the menu. When you are ready to exit the menu, press the "MENU" key.
When the camera is fi rst turned on, a series of status messages are displayed.
They include software version number, current time, and current date. These settings
can be changed by scrolling to the appropriate menu.
NOTE:
The camera remembers your camera settings even when the batteries have been removed.
Your settings are maintained until you change them.

Set Time Menu

Press the "MENU" key until the set time menu appears on the display. Press the
"SELECT" key to enter the menu. Use the "UP" and "DOWN" keys to increment and
decrement the hour and minute fi elds. Use the "SELECT" key to change between
hours and minutes. Remember that the time is maintained in military notation
(see table-1).
Press the "MENU" key to exit the menu. This will save your time setting.
Military Time Table - Table 1
7
Manual-3-30.indd Sec2:7 Manual-3-30.indd Sec2:7 4/23/07 4:16:38 PM 4/23/07 4:16:38 PM