Door Area; Base Area - Electrolux DIVA Series Service Manual

The appliance may be considered as consisting of three major assemblies:
The entire structure is enclosed by a series of removable parts such as the worktop (free-standing versions
only), the door, two lateral panels, the plinth (free-standing versions only) and the foot support. Removal of
these parts facilitates access to the internal components from above, from the front, from the sides and from
the base of the appliance.

2.1 Door area

Control panel assembly
External door
Internal door
Hinge
Hinge pin
Lower door seal
Door latch assembly
Integrated dispenser

2.2 Base area

Base
Removable bottom panel (if featured)
Adjustable feet
Foot support
Adjustable rear foot (central) (built-in and fully-integrated versions)
Electronic board
Anti-flooding device (if featured)
Wash pump capacitor
Integrated terminal block/power cable/suppressor
Washing motor
Tube-enclosed heating element
Drain pump
Drain pump non-return valve
Fill solenoid valve (if featured)
Regeneration solenoid valve
Plinth (free-standing versions)
Water softening system
Salt sensor (if featured)
Level pressure switch
Anti-overflow pressure switch
SOI/TD
DOOR AREA - BASE AREA - TUB AREA
6/23 599 37 44-27