Table of Contents
Advertisement
2.11 – Finishing Up
Congratulations on making it this far! You're finished setting up the hardware aspect of your
computer. Before closing up your chassis, make sure that all cables and wires are connected
properly, especially IDE cables and most importantly, jumper cables. You may have difficulty
powering on your system if you properly connect motherboard jumpers.
Setting up your computer on a hardware level will probably be one of the easiest things to do if
you carefully followed these instructions. Hopefully, by the time you're reading this, you should
already have enough experience to set up another computer without much aid of a manual.
In the rare circumstance that you experienced difficulty even though the instructions herein were
followed, you can find help by asking your vendor for assistance. If they are not available for
assistance, please find setup information and documentation online at our website or by calling
your vendor's support line.
21
http://www.tyan.com
Advertisement
Table of Contents
