Flashes And "Fault" Is Displayed; Flashes And "Service" Is Displayed; Controls Locked Out" Is Displayed; External Hook-Up" Is Displayed - Viessmann vitocrossal 300 Operating Instructions Manual
Floor mounted, gas-fired condensing boiler with matrix gas burner and lambda pro control
Hide thumbs
Also See for vitocrossal 300:
- Service instructions manual (164 pages) ,
- Service instructions for contractors (148 pages) ,
- Service manual (108 pages)
Table of Contents
Advertisement
Troubleshooting
"
" Flashes and "Fault" is Displayed
Cause
Heating system fault.
Flashes and "Service" is Displayed
" "
Cause
The time for a service, as specified by your heating
contractor, has arrived.
"Controls Locked Out" is Displayed
Cause
Control was blocked by your heating contractor.
"External Hook-up" is Displayed
Cause
The operating program set at the control unit was
changed by an external device, e.g. extension EA1.
"External Program" is Displayed
Cause
The operating program set at the control unit was
changed by the Vitocom communication interface
36
Vitocrossal 300 CU3A 26 to 57 Operating
Remedy
Proceed as described (refer to page 32).
Remedy
Proceed as described on page 31.
Remedy
Your heating contractor can lift this block.
Remedy
No remedy is required.
Remedy
You can change the operating program.
Advertisement
Table of Contents
