Dhw Heating; Setting The Dhw Temperature; Factory Setting 122ºf (50ºc); Operating Program - Viessmann vitocrossal 300 Operating Instructions Manual

DHW Heating

Setting the DHW Temperature

Operating Program

24
Vitocrossal 300 CU3A 26 to 57 Operating
Factory setting 122°F (50ºC)
Extended menu:
1.
2. "DHW"
3. "DHW temperature setpoint"
4. Using set the required value
5. Ok to confirm
Further information can be found in "Terminology" page 40.

Setting the operating program for DHW heating

For the primary heating circuit (refer to page 28)
Standard menu
1. for the operating program:
"Heating and DHW"
Or
"Only DHW"
2. OK to confirm.
For all heating circuits
Extended menu
1.
2. "Heating"
3. Poss. for the required heating circuit.
4. "Heating program"
5. "Heating and DHW"
Or
"Only DHW" (summer mode no central heating)
For information on the operating programs (refer to
page 16).