Specifications - Sony F65 Operation Manual

Specifications

General
Power requirements
Power consumption
Operating temperature
Storage temperature
Imagers
Imagers
Method
Aspect ratio
Electrical characteristics
Latitude
Registration
Geometric distortion
Optical system specifications
Lens mount
Flange focal length
24 Specifications
10.5 V to 17 V DC
Approx. 69 W at
23.98 PsF (Mechanical
rotary shutter operating.
Not including lens,
viewfinder)
0 °C to 40 °C (32 °F to
104 °F)
–20 °C to +60 °C
(–4 °F to +140 °F)
Super 35-mm CMOS
image sensor
Single sensor
17:9
14-stop
Within 0.02% (not
including lens
distortion)
Negligible (not including
lens distortion)
PL Mount
52.00 mm (–0.03 mm to
+0.05 mm adjustable in
0.01 mm increments by
shim replacement)
Input/output connectors
DC IN LEMO 8-pin male (1),
10.5 V to 17 V DC, 24 V
DC
DC OUT 12 V: 11-pin (1), 12 V
DC, 4 A maximum
24 V: 3-pin (1), 24 V DC,
4 A maximum
(The usable current may
be limited depending on
the load and input
conditions.)
VF 20-pin (1)
VF (for DVF-EL100)
26-pin (1)
LENS 12-pin (1)
SDI OUT 4:2:2, BNC type (2), HD-
SDI signal, BTA-
S004A-compliant,
75 ohms, 0.8 Vp-p,
1.485 Gbps
HD-Y OUT BNC type (1), 75 ohms,
1.0 Vp-p
GENLOCK IN BNC type (1), 75 ohms,
SMPTE 274M HD
3-level sync, 0.6 Vp-p
Or HD-SDI signal, BTA-
S004A-compliant
REMOTE 8-pin (1)
EXT I/O LEMO 5-pin, female (1)
(network) RJ-45 type (1), 10BASE-
T, 100BASE-TX
Lens mount hot shoe
4-pin (2), conforming to
ARRI LDS (Lens Data
System) and Cooke /
i Intelligent Electronic
Lens System
USB Type A, USB2.0 Hi-
Speed (2)
"Memory Stick" (MS)/SD memory card
Combo-connector (1)
Supports "Memory
Stick Duo", "Memory
Stick PRO Duo"