Table of Contents
Advertisement
Lock Nut
Steering Column
3
• Place the lock nut (rounded side up) on to the end of the
steering column.
• Tighten the lock nut firmly using the closed end of the assembly tool.
Steering
Column
Cap
4
• "Snap" the steering column cap over the lock nut.
K4565pr-0921
ASSEMBLY
Assembly Tool
Rounded Side Up
5
SIDE VIEW
• Turn the vehicle upright.
• Pull the handlebar up to be sure the steering column is secure.
• If you can remove the steering column, you have not assembled
the steering column retainer correctly. Please refer back to assembly
steps 3 and 4.
Handlebar
Connector
6
REAR VIEW
• Plug the handlebar connector into the motor connector.
Pull Up
Motor
Connector
F
9
Advertisement
Table of Contents
