Residual Heat Indicator - AEG 88131 K-MN User Manual

28
Description of the Appliance
Displays
-

Residual heat indicator

1
Warning! Risk of burns from residual heat. After being switched off, the cooking zones
need some time to cool down. Look at the residual heat indicator
3
Residual heat can be used for melting and keeping food warm.
Control bar
The control bar is a special Touch Control field.
The control bar is touched where the desired
heat setting is positioned. The heat setting is
shown in the display. Correct to the left or the
right, if necessary.
Do not release before the desired heat setting is
reached.
3
If the control bar is touched for longer than 6
seconds, a signal sounds and the appliance
switches itself off.
The induction cooking zones create the heat
required for cooking directly in the base of the
cookware. The glass ceramic is merely heated by
the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of the elec-
tronics.
Display
Keep Warm setting
Heat settings
Power
Fault
Residual heat
Child safety device
Automatic switch off
Description
STOP+GO function is set
To set heat settings
Power function is switched on
Malfunction has occurred
Cooking zone is still hot
Lock/child safety device is engaged
Switch off is active.
.