Argox OS-214plus User Manual page 9

4. Unwrap the ribbon roll pack and separate the ribbon roll
and the bare core.
5. Attach the edge of the ribbon on the bare core and wind it
a little bit onto the core.
6. Insert the ribbon roll into the supply holder. (First snap in
the left side and then the right side.)
Ribbon Supply Holder
16
Ribbon Roll
Bare Core
7. Turn back the print head module and then insert the bare
core into the pick-up holder. (First snap in the left side, and
then the right side.)
Ribbon Pick-up Holder
17
Bare Core