Motorola CPEi 150 Series User Manual page 11

2
There are six main menus in the GUI:
Table 2-2 Menu Description
The following buttons appear at the bottom of each configuration page:
Table 2-3 Button Descriptions
2-4
Menu Tab
Personalize
Internet
Status
Port Forwarding
Local Address
Control Panel
Button
Apply
Undo
Next
Refresh
Auto Refresh
Wizard
Description
Use this menu to set up your password,
device time and device name. You can also
abandon your personal settings by
clicking "Restore Factory Settings".
Use this menu to configure internet
connection settings, including
Authentication, Protocol, Firewall, and
Dynamic DSN.
Use this menu to display network status,
including WiMAX, Internet, LAN, and
Device Information.
Use this menu to enable Universal Plug
and Play (UPnP) Internet Gateway Device
(IGD) profile to allow certain Windows
applications to setup the port forwarding
rule dynamically when NAT is enabled on
this device.
Use this menu to display the IP Address
and netmask address in the local network.
Use this menu to manage the device
software.
Function
Saves your changes. If you restart your
CPE without saving your changes, all
changes are lost. After the device restarts,
the last saved configuration is used.
Clears your changes on the current page
and returns to the main menu. Once you
click Apply, the Undo button will NOT
clear your changes.
Confirms the current setting and moves
on to the next screen.
Manually updates current status page.
Updates automatically without needing
you to refresh manually.
Starts Setup Wizard manually if your CPE
did not run the setup program
automatically.
Installation
68P09291A19-A
APR 2008