Advertisement
7. If you also connect the Impact Acoustics lo HDTV via S-Video or Composite Video Cable, press
ole:
(Please refer to your ' T V document to check with your TV system).
The default setting is FIT mode, Impact Acoustics converts the corriputer image to a television irnage by using
horizontallvertical scaling and frame rate converting. The computer image will convert to television and
display as the same television video resolution, (Please refer the example as below)
When I:? mode is active, Impact Acoustics takes 1:l AID (Analog to Digital) sampling rate of incoming
computer image, which can convert the cornputer image to a television image without horizontallvertical
scaling. You will get the 1:l computer image on television at high fidelity with less distortion. (Please refer the
example as below)
a
button will switch Computer Image into HDTV as TV resolution.
If your TV-screen image cannot display properly (no display, or appears black and white with
button again to match your TV system as NTSC or PAL
ode to get
TSC)
Advertisement
