Advertisement
Make sure your lmpact Acoustics is secured and correct install with your PC. (Please refer to the
Hardware lnstallation "'Connecting Impact Acoustics to your PC" in Chapter 2.2 an page 4)
Make sure your lmpact Acoustics is secured and correct install with your TV. (Please refer to tho
Hardware Installation "Connecting lmpact Acoustics to your TV" in Chapter 2.3 on page 4)
Turn on your PC, and check with VGA resolution. Impact Acoustics can convert the VGA resolution from
640x480 up to 1600x1200. It accepts the VGA refresh rate (vertical frequency) from 60Hz tol50Hz,
which is depending on different VGA resolution. Please refer to "Supported VGA Modes" in Appendix on
page 15.
Press Power button on the lmpact Acoustics box, the LED light will be on when the Power Adapter is
plugged in.
Turn on your TV, and select the external input source (for example: Video 1, Linel or Inputl) to which you
have connected the lmpact Acoustics.
unstable signal), please press the "
(Please refer to your TV document to check with your TV system).
Make sure your lmpact Acoustics is secured and correct install with your PC. (Please refer to the
Hardware lnstallation "Cannecting lmpact Acoustics to your PC" in Chapter 2.2 on page 4)
Make sure your Impact Acoustics is secured and correct install with your WDTV. (Please refer to the
Hardware lnstallation "Connecting lmpact Acoustics to your HDTV" in Chapter 2.4 on page 5)
Turn an your PC, and check with VGA resolution. lmpact Acoustics can convert the VGA resolution From
640x480 up to 1600x?200. If. accepts the VGA refresh rate (vertical frequency) from 60Hz tol50Wz,
which is depending on different VGA resolution. Please refer to "Supported VGA Modes" in Appendix on
page 15.
plugged in.
Turn on your HDTV, and selecl the external input source (for example: Y Pb Pr Input) to which you have
connected the lmpact Acoustics.
tton on the Impact Acoustics box to switch the Computer Image into NTSC or
Advertisement
